MarkBass – Mark Studio 1 (Repack) (AU, RTAS, STANDALONE, VST) [MAC]


Year of issue: 2010
Version: 1.0.5
Developer: MarkBass / Overloud
Platform: Intel only
System requirements: Intel Mac
Mac OS X version 10.4.10 or later
Interface language: English only
Tabletka: Not required

Description: The STUDIO 1 plug-in has been designed to faithfully reproduce the sound of Markbass amps in any recording software.
Fourth generation engine from Overloud.
When you record bass through any audio interface (even those of the highest quality), you always lose natural harmonics, and you can never reproduce rich bass tones when playing live with an amp. In studio recording with amplifiers, it is rarely easier: you need a special room with a minimal reflective surface, microphones must be carefully positioned, and there are frequent phase and delay problems between the direct signal and the signal from the microphone.
Three top-of-the-line Markbass amp models: TA501, R500 and Classic 300.
Six Markbass cabinets: STD 151HR (rear-ported 1×15 “), STD 152HR (rear-ported 2×15”), STD 104HR (rear-ported 1×15 “), STD 104HF (front-ported 4×10”), STD 106HF (front-ported 6×10 “), and Classic 108 (sealed 8×10”).
Choice of 6 microphones as well as presets in combination with 2 front microphones.
More than 1 microphone can be used simultaneously: main (bass), tweeter and, if necessary, rear bass reflex (port).
Overloud technology and fourth generation audio engine.
Accurate reproduction of every characteristic and nuance of Markbass amps and cabinets.
Each microphone / cabinet combination has been recorded in a high-end studio by the best Italian sound engineers.
Ultra low-frequency control for extra-deep bass with one click.
64 factory presets from Markbass engineers and artists and 64 blank user presets.