TSE Audio – X50 v2.0.0 (VST, AU) [WIN.MAC x86 x64]


Year / Release Date: 02/15/2014
Version: 2.0.0
Developer: TSE Audio
Developer website: www.tseaudio.com/
Format: VST, AU
Bit depth: 32bit, 64bit
Tabletka: Present
System requirements: Windows, Intel Core 2 or newer, Vista / Windows 7 / Windows 8, 32 / 64bit compatible – VST2
Mac, Intel Core 2 or newer, OS X 10.7 or higher, 64bit compatible – VST2 / AU


Description: TSE X50 – emulation of popular top guitar amps, which were often used when recording “metal”.
The plugin is available in both 32-bit and 64-bit versions.

The X50 is a digital emulation of a famous US guitar amp. Because two almost similar amps were made, both red channels are modeled. The green channel is modeled after the first make. You can’t go wrong with this amp for metal!
TSE X50 Features
Input Level: Control the incoming (guitar) signal. Value of 1.0 = + 0dB and 2.0 = + 6dB.
Output Level: Control the outgoing (amp) signal.
PreGain: Preamp gain, this is the main dirt control of the amp.
Low, Mid, High: Tonestack / Equalizer.
PostGain: Volume / PA overdrive.
LowEnd: The amount of resonance in the (modeled) speaker (~ 70Hz).
Presence: The amount of presence, 1kHz and up.
Red Ch. Mode switch: Change between MK1 and MK2 version of the red channel (only).
PreAmp switch: Bypass the preamp-section.
PowerAmp switch: Bypass the poweramp-section.
PowerTubes switch: Change between 6L6GC / EL34 tubes in the PowerAmp model.
Quality switch: ‘LO’ and ‘HI’ setting. HI setting removes additional aliasing.
Stereo switch: Process two guitars at once. They must be hard-panned left / right to avoid bleed between channels! Panning should be done in the IR-loader or by channel routing.


Comment